- The tuning peg had been snapped into two pieces, and rebuilding one from scratch was out of the question. The wood looked like ebony, but not as oily. First, I superglued both parts together. While a firm bond was made, I wouldn't expect it to survive the rigors of use.
- I carefully drilled two 0.25" holes through the bonded seam. Here I have a piece of sandpaper to roughen the bore.
- Switching to aliphatic resin wood glue the holes were doweled. I surprised myself by not breaking the superglue joint when pushing in the dowels.
- Hard to see it here, but the peg is in place after sanding the dowels smooth. The connection is bombproof and the peg is as good as new. I didn't try to mask this repair because the friction peg is an area of high abrasion.
